Overview
The CM250 is a mounting kit that is included with several products that are mounted and leveled on the end of a crossarm. It consists of a fabricated aluminum adapter with set screws, a captive 3/8 in. bolt, and a 3/16 in. Allen wrench. The adapter is meant to be attached to the end of a 1.31 in. outer diameter pipe or crossarm, such as the CM204. The 3/16 in. Allen wrench may be used to tighten the pair set screws that hold the adapter in place on the crossarm. The captive 3/8 in. bolt screws into the block or base of the sensor being mounted. As the bolt is tightened, the base of the sensor and the top of the adapter form a ball-and-socket joint that can be adjusted until the sensor is level.
Images
Specifications
| Dimensions | 13.34 x 6.35 x 4.45 cm (5.25 x 2.5 x 1.75 in.) |
| Weight | 308.44 g (0.68 lb) |
Listed Under
Replacement Part for the following products:
- EC155 - Closed-Path CO2/H2O Gas Analyzer
- IRGASON - Integrated CO2 and H2O Open-Path Gas Analyzer and 3-D Sonic Anemometer
- CSAT3 - 3D Sonic Anemometer
- CSAT3BH - Heated, 3-D Sonic Anemometer with Integrated Electronics
- EC150 - CO2/H2O Open-Path Gas Analyzer
- CPEC306 - Expandable Closed-Path Eddy-Covariance System with EC155 and Pump Module
- CPEC300-Series - Compact Closed-Path Eddy-Covariance System with EC155 and Pump Module
- CPEC310 - Expandable Closed-Path Eddy-Covariance System with EC155, Pump Module, and Automatic Zero and Span
Privacy Policy Update
We've updated our privacy policy. Learn More