This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available | |
|---|---|
| Repair | No |
| Calibration | No |
| Free Support | No |
Overview
The SM4M was only compatible with our mixed-array data loggers and the DSP4 Heads Up Display. (See the Compatibility information.) It used non-volatile Flash EEPROM memory to store two million low-resolution data points (the SM16M stored eight million).
Read More
Images
Detailed Description
The SM4M was only compatible with our mixed-array data loggers and the DSP4 Heads Up Display. (See the Compatibility information.) It used non-volatile Flash EEPROM memory to store two million low-resolution data points (the SM16M stored eight million).
The SM4M was used to augment on-site data storage, and to transport data or programs between the data logger and computer. It had a sealed canister housing fitted with a single, 9-pin D-connector. LEDs indicated when data transfer was active.
The SM4M's internal memory could store both data and programs. The memory was split into 64 kbyte blocks.
The SM4M was previously ordered as p/n 10820.
Specifications
| Storage Capacity | 2 million low-resolution data values |
| Program Storage | Up to eight programs with a total capacity of 128 kbytes, including labels. Storing programs does not affect available data storage capacity. |
| Canister | Sealed |
| Processor | Hitachi H8S |
| Operating System | 64 kbytes, flash memory based, user downloadable |
| Memory Configuration | User selectable for either ring style or fill-and-stop. Default is ring style. |
| Power Requirements | 5 ±0.3 Vdc @ 100 mA (max.) |
| Standard Operating Temperature Range | -25° to +50°C |
| Extended Operating Temperature Range | -55° to +85°C |
| Dimensions | 7.2 x 13.5 x 2.0 cm (2.8 x 5.3 x 0.8 in.) |
| Weight | 181 g (6 oz) |
Data Transfer Rates |
|
| Data Storage | 9600, 76800 bps |
| Telecommunications | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
Current Drain |
|
| Active, Processing | 30 to 40 mA, average (for example, memory test) |
| Active, but Waiting | 10 mA, average (for example, communications mode) |
| Typical Current during Data Storage from a Logger | 15 mA, average |
| Low Power Standby State | < 200 μA |
| Peak Current | 60 mA (flash erase) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| 21X (retired) | ||
| CR10 (retired) | ||
| CR1000 (retired) | ||
| CR10X (retired) | ||
| CR23X (retired) | ||
| CR500 (retired) | ||
| CR5000 (retired) | ||
| CR510 (retired) | ||
| CR9000 (retired) |
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| DSP4 (retired) |
Additional Compatibility Information
Computer Interface
The SC532A Interface was typically used to connect the storage module to a computer.
Data Logger Considerations
The SM4M is compatible with mixed-array data loggers. It is not compatible with data loggers that store data in a table-based format.
Data Logger Interface
The SM4M connected to a mixed-array data logger via an SC12 9-pin cable.
Documents
Downloads
SMS v.4.10 (6.73 MB) 06-08-2007
SMS (Storage Module Software) is a utility used to configure and retrieve data from Campbell Scientific storage modules. It is a standalone application which is no longer included in LoggerNet starting with LoggerNet 4.0
Frequently Asked Questions
Number of FAQs related to SM4M: 1
-
The SM192 storage module will store 96,000 low-resolution data points. The SM4M storage module will store 2 million low-resolution data points.
Case Studies
Permafrost is a thermal condition—its formation, persistence, or disappearance is highly dependent on climate. Its......read more
Privacy Policy Update
We've updated our privacy policy. Learn More