Services Available |
---|
The Q7.1 measured the difference between incoming and outgoing radiation. A thermopile output a voltage proportional to the temperature difference between the top and bottom surfaces of the radiometer.
Contact REBS (manufacturer of the Q7.1) for repair and recalibration: 206-624-7221
The "-L" on a product model indicates that the cable length is specified at the time of order.
The Q7.1 measured the difference between incoming and outgoing radiation. A thermopile output a voltage proportional to the temperature difference between the top and bottom surfaces of the radiometer.
As shading and reflection represent sources of error to the net radiation measurement, the Q7.1 was typically deployed at some distance to the primary instrument mount. A simple vertical pipe affixed with a CM210 mount was recommended for this purpose.
Nominal calibration factors: 9.6 W m-2 mV-1 for positive values; 11.9 W m-2 mV-1 for negative values.
Nominal Calibration Factors |
|
Time Constant | Approximately 30 s |
Sensing Head Size | 5.7 x 7.2 x 17.7 cm (2.3 x 2.8 x 7.0 in.) |
Support Arm Diameter | 2.0 cm (0.8 in.) |
Support Arm Length | 75.0 cm (29.5 in.) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
21X (retired) | ||
CR10 (retired) | ||
CR1000 (retired) | ||
CR10X (retired) | ||
CR200X (retired) | ||
CR211X (retired) | ||
CR216X (retired) | ||
CR23X (retired) | ||
CR3000 (retired) | ||
CR500 (retired) | ||
CR5000 (retired) | ||
CR510 (retired) | ||
CR800 (retired) | ||
CR850 (retired) | ||
CR850 (retired) | ||
CR9000 (retired) | ||
CR9000X (retired) |
We've updated our privacy policy. Learn More