The CM221 mounts a pipe or tube at 90° to another pipe or tube. It is typically used to attach a sensor with a vertical pipe (including most wind sensors) to a crossarm. The cast aluminum, right-angle mounting bracket has 3.8 cm (1.5 in.) U-bolts and hardware and will accommodate tubing with a 1- to 1.5-in. outer diameter. (For more information, refer to the Compatibility section below.)
If your application requires the ability to adjust or level your sensor, consider using the CM230 Adjustable Inclination Mounting Kit instead.
U-bolt and Washer Material | 304 stainless steel |
Bracket Material | Cast aluminum |
Dimensions | 7.6 x 7.6 x 9.1 cm (3.0 x 3.0 x 3.6 in.) |
Weight | 340.19 g (0.75 lb) |
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Product | Compatible | Note |
---|---|---|
CM204 |
Product | Compatible | Note |
---|---|---|
014A-L | ||
05103-45-L | ||
05106-L | ||
05305-L | ||
27106T-L | ||
52202-L | ||
CM202 | ||
CM203 | ||
CM206 | ||
CSAT3 (retired) | ||
SI-111 (retired) | ||
SR50A-L (retired) | ||
WXT520 (retired) |
The CM221 is compatible with sensors that have a 0.75 to 1 in. IPS (1 to 1.5 in. OD) pipe mount.
The CM221 is compatible with user-supplied pipe that has a 0.75 to 1 in. IPS (1 to 1.5 in. OD).
The CM221 can be used to mount the 17992 GPS antenna and the 27084 CVF3 Mounting Stand.
We've updated our privacy policy. Learn More