SQ-110-L Apogee SQ-110 Sun Calibration Quantum Sensor

Ordering Info Ask a Question Ask a Question

Quantum (PAR) sensors / SQ-110-L

SQ-110-L Apogee SQ-110 Sun Calibration Quantum Sensor

Images
Detailed Description
Specifications
Compatibility
Documents
Listed Under

Overview

The SQ-110 measures photosynthetically active radiation and is calibrated for use in sunlight. Its spectral range of 410 to 655 nanometers. This quantum sensor connects directly to our data loggers. Its output can be measured by all of our data loggers (except the CR200X).

The "-L" on a product model indicates that the cable length is specified at the time of order.

The AC-100 and ApogeeAMS Software (sold separately) to download the data collected on a computer.

Detailed Description

The SQ-110 consists of a cast acrylic diffuser (filter), photodiode and a signal processing circuitry mounted in an housing to provide photosynthetically active radiation (PAR) measurements for solar, agricultural, meteorological, and hydrological applications. Calibrated through side-by-side comparison to the mean of four Apogee model SQ-120 transfer standard quantum sensors under high output T5 cool white fluorescent lamps.

Specifications

Light Spectrum Waveband: 410 to 655 nm
Sensitivity: 0.2 μmol.m^-2.s^-1
Cosine Response: ±5% at 75° zenith angle
Temperature Response: 0.06 ±0.06 % per °C
Long-term Drift: < 2% per year
Operating Temperature: -40° to +70°C
Relative Humidity: 0 to 100%
Diameter: 2.4 cm
Height: 2.8 cm
Weight: 90 g (with 5 m of cable)

Compatibility

Sensor Mounts

Accurate measurements require the sensor to be levelled using a AL-100 levelling fixture. This levelling fixture incorporates a bubble level and three adjusting screws. The AL-100 mounts to a tripod or tower using the CM225 mounting stand. For most applications, Campbell Scientific recommends attaching the CM225 to a CM202, CM204, or CM206 crossarm. The CM225 can also be attached to a tripod or tower mast.