Easy to Install
Excellent Soil Contact
Overview
The SoilVUE™10 is a soil water content profile sensor powered by Campbell TrueWave™TDR technology. This soil moisture, electrical conductivity, and temperature profile sensor was developed with environmental researchers and environmental monitoring networks in mind. The SoilVUE™10 represents several exciting advancements in in-situ soil measurement that should make this an extremely compelling option for anyone in these applications who needs to make multiple measurements in a profile.
Campbell Scientific’s proprietary TrueWave™TDR technology combines a best-in-class rise time with an advanced waveform analysis technique to determine the true travel time of a high-frequency pulse. This process achieves a high-resolution, smooth signal for measurements that are defensible and can be universally compared with other TDR measurements. Not all TDR-based sensors perform equally well.
Read More
Benefits and Features
- Measures VWC, permittivity, EC, and temperature
- Six or nine depths measured with one sensor
- Quick and low-impact installation
- Digital output is compatible with most Campbell Scientific data loggers
- Designed for long-term outdoor operation
- TrueWave™TDR technology is proven and trusted
Images
Detailed Description
The SoilVUE™10 consists of TDR circuitry connected to a series of six or nine helical wave guides that make up part of the overall threaded design. The threaded design with individual sensors built into the threads improves sensor contact with the soil to reduce potential error from air gaps. The TDR circuitry generates a short rise time electromagnetic pulse that is applied to the helical wave guides. The elapsed two-way travel time of the applied pulse is used to calculate the dielectric permittivity of the surrounding media and determine the volumetric water content using a mixing model.
The soil water content profile sensor can be installed in a hole made by a standard 5 cm (2 in.) hand auger. Excavation machinery or expensive custom tools are not necessary to install the sensor.
The included cable has an IP67 rated M12 connector that is detachable from the sensor for easy field replacement if the cable becomes damaged.
Aspen 10-Compatible IoT Solution
The SoilVue 10 can be paired with the Aspen™10 Internet of Things (IoT) Edge Device. To get next-gen IoT solutions for advanced meteorological monitoring, click the image below:
Specifications
| Measurements Made | Volumetric water content (VWC), permittivity, electrical conductivity (EC), and temperature |
| Operating Temperature Range | -40° to +60°C |
| Maximum Installation Torque | 54 N m (40 ft⋅lb) |
| Operating Voltage Range | 9 to 36 Vdc |
| Diameter |
|
| Maximum Cable Length | 304.8 m (1,000 ft) |
| Length | 0.55 m/1.05 m (21.5 in./41.2 in.) depending on the option ordered |
| Weight | 1.9 kg/3.6 kg (4.2 lb/7.9 lb) depending on the option ordered |
Current Drain |
|
| Active | ~64 mA (@ 12 Vdc) |
| Quiescent | ~1.5 mA (@ 12 Vdc) |
Measurement Depths |
|
| 0.5 m Option | 5, 10, 20, 30, 40, and 50 cm (2, 4, 8, 12, 16, and 20 in.) |
| 1 m Option | 5, 10, 20, 30, 40, 50, 60, 75, and 100 cm (2, 4, 8, 12, 16, 20, 24, 30, and 40 in.) |
Electrical Conductivity |
|
| Range | 0 to 10 dS/m |
| Accuracy |
|
Relative Dielectric Permittivity |
|
| Range | 1 to 80 |
| Accuracy | ±1 permittivity unit (between 4 and 42 permittivity) |
Volumetric Water Content |
|
| Range | 0 to 100% |
| Water Content Accuracy |
±1.5% typical with most soils Soils with high organic matter (> 12% soil organic carbon) or high clay content (> 45% clay) may need a soil-specific calibration due to the dispersive nature of these materials. |
Soil Temperature |
|
| Accuracy | ± 0.15°C (between -30° and +40°C) |
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Dataloggers
| Product | Compatible | Note |
|---|---|---|
| CR1000 (retired) | ||
| CR1000X | ||
| CR300 | ||
| CR3000 (retired) | ||
| CR310 | ||
| CR350 | ||
| CR6 | ||
| CR800 (retired) | ||
| CR850 (retired) | ||
| CR850 (retired) |
Miscellaneous
| Product | Compatible | Note |
|---|---|---|
| Aspen10 |
Documents
Videos & Tutorials
Downloads
SoilVue 10 Example Program v.1 (1 KB) 03-12-2020
This example CR6 program collects the volumetric water content, relative permittivity, soil temperature, and bulk electrical conductivity for each depth of a 0.5 m SoilVue 10 probe.
Case Studies
Overview In the fight against climate change, innovative solutions are emerging to address the global challenge......read more
Overview In May 2019, the Government of Zambia embarked on the Climate Adaptation Water and Energy......read more
Overview The Kingdom of eSwatini in Southern Africa—with its agricultural-based economy and a population of less......read more
The Utah Geological Survey, supported by the Utah Division of Water Rights, has constructed a......read more
Articles and Press Releases
Newsletter Articles
Privacy Policy Update
We've updated our privacy policy. Learn More