Overview
The 8025 is a 3 V Coin Cell 24 mm CR2430 lithium battery.
This lithium battery is included in our CR9000(X), CR10X, and CR510 dataloggers. The 8025 powers the clock and RAM when the primary 12 Vdc power supply is not connected.
The battery should be replaced when its voltage falls below 2.4 Vdc.
Images
Specifications
| Model | CR2430 |
| Capacity | 270 mAhr |
| Self Discharge Rate | 1% of capacity per year |
| Operating Temperature Range | -20° to +60°C |
| Storage Temperature Range | -40° to +60°C |
| Diameter | 2.45 cm (1 in.) |
| Thickness | 0.3 cm (0.12 in.) |
| Weight | 4.54 g (0.01 lb) |
Frequently Asked Questions
Number of FAQs related to 8025: 1
-
The internal battery is not rechargeable. In the case of low internal battery voltage, data will only be maintained as long as a power supply is connected. Collect all data from the data logger before disconnecting the power. Then, replace the internal battery.
- For the CR800, CR850, CR1000, or CR3000 dataloggers, use the 13519 replacement lithium battery.
- For the CR5000 datalogger, use the 13497 replacement lithium battery.
- For the CR9000X and CR9000XC dataloggers, use the 8025 replacement lithium battery.
Listed Under
Replacement Part for the following products:
- LEVELVUEB10 - Water-Level Continuous Flow Bubbler with Integrated Screen
- CR9000 - Measurement and Control System
- CR9011 - Power Supply Module
- CR9000C - Measurement and Control System
- CR10XM - Measurement and Control Module Only
- CR9000XC - Compact Datalogger Base System
- CR9000X - Datalogger Base System
- ET106 - ETo Station
- CR510-2M - Basic Datalogger with 2M Additional Memory
- CR9000XDC - DC Datalogger Base System
- CR10X - Datalogger for Measurement and Control
- CR510 - Basic Datalogger
- CR10X-2M - Measurement and Control Data Logger with 2 M Additional Memory and Wiring Panel
Privacy Policy Update
We've updated our privacy policy. Learn More