Overview
The 1049 connects a 1 in. pipe to a 0.75 in. pipe. The 1049 is typically used to attach a sensor with a 0.75 in. pipe mount to a CM202, CM204, or CM206 crossarm. This usage provides functionality similar to the CM220 right-angle mounting bracket.
Read More
Images
Detailed Description
The 1049 NU-RAIL® Crossover Fitting connects a vertical 3/4" IPS pipe to a horizontal 1.0" IPS pipe. It typically attaches a sensor with a 3/4” IPS pipe mount to a CM202, CM204, or CM206 crossarm. This usage provides similar functionality as the CM220 Right Angle Mounting Bracket.
The 1049 has two ovoid segments that are oriented at a 90° angle. Each segment accepts one piece of pipe allowing a vertical pipe to be secured to a horizontal pipe. The horizontal and vertical pipes are secured to the 1049 fitting using screws, which are tightened with an Allen wrench.
Compatibility
The 1049 can be used with a CM202, CM203, CM204, or CM206 aluminum crossarm to attach sensors with a 3/4" IPS pipe mount; is not compatible with the CM202SS and CM204SS stainless-steel crossarms. The 1049 can also be used with the 019ALU crossarm (mostly retired) to attach sensors with a 1.0" IPS pipe mount.
| Sensors with 3/4" IPS pipe mount |
Sensors with 1.0" IPS pipe mount |
|
27106T |
034B Wind Set 024A Wind Vane 03002 Wind Sentry Set 05103 Wind Monitor 05103-45 Alpine Wind Monitor 05106 Wind Monitor Marine 05305 Wind Monitor-AQ |
Pipe
The 1049 is compatible with user-supplied pipe that has a 1.0 in. IPS (1.32 in. OD).
Listed Under
- 03101-L - Wind Sentry Anemometer
- 014A-L - 3-Cup Anemometer
- 27106T-L - Vertical Propeller Anemometer
- CM206 - 6 ft Crossarm with One CM210 Mounting Kit
- CM203 - 3 ft Crossarm with One CM210 Mounting Kit
- CM202 - 2 ft Crossarm with CM210 Mounting Kit
- CM204 - 4 ft Crossarm with One CM210 Mounting Kit
- 17992 - 28 dBi 3.3 V active GPS Antenna without Cable
Privacy Policy Update
We've updated our privacy policy. Learn More