Stack Mounting Kits / 31551
Overview
The 31551 is a kit to allow stacking of components inside Campbell Scientific enclosures. The kit includes two leg brackets. It is used to raise a data logger up and off the backplate so that wiring is easier or so that components can be stacked. The brackets raise a data logger (or other module) off the back panel by approximately 7.62 cm (3.0 in.).
Images
Specifications
| Bracket Length | 10.16 cm (4.0 in.) |
| Bracket Height | 7.52 cm (2.96 in.) |
| Weight | 90.72 g (0.2 lb) |
Compatibility
The 31551 does not fit inside the ENC10/12. If the ENC10/12R is used, it must be oriented with the hinge toward the top or bottom.
Listed Under
Other Accessory for the following products:
Common Accessory for the following products:
- PWENC16/18 - Prewired Enclosure, 16 x 18 inches
- PWENC12/14 - Prewired Enclosure, 12 x 14 inches
- PWENC14/16 - Prewired Enclosure, 14 x 16 inches
- ENC14/16 - Weather-Resistant Enclosure, 14 x 16 inches
- ENC16/18 - Weather-Resistant Enclosure, 16 x 18 inches
- ENC10/12R - Raised Lid Enclosure, 10 x 12 inches
- ENC12/14 - Weather-Resistant Enclosure, 12 x 14 inches
- 18997 - 14/18 Aluminum Enclosure with Blank Panel
Privacy Policy Update
We've updated our privacy policy. Learn More