Stack Mounting Kits / 31143
Overview
This hinged stack bracket is designed to fit a CR1000 datalogger, CR6 datalogger, or multiplexer on either the top or underneath. The hinge enables access to the equipment underneath without disconnecting any wires (assuming that the wires are long enough).
Images
31143
Specifications
| Dimensions | 27.168 x 10.16 x 13.317 cm (10.696 x 4.00 x 5.243 in.) |
Compatibility
The 31143 is not compatible with the ENC8/10.
The 31143 does not fit inside the ENC10/12. If the ENC10/12R is used, it must be oriented with the hinge toward the top or bottom.
Listed Under
Other Accessory for the following products:
Common Accessory for the following products:
- PWENC12/14 - Prewired Enclosure, 12 x 14 inches
- PWENC14/16 - Prewired Enclosure, 14 x 16 inches
- PWENC16/18 - Prewired Enclosure, 16 x 18 inches
- ENC10/12R - Raised Lid Enclosure, 10 x 12 inches
- ENC14/16 - Weather-Resistant Enclosure, 14 x 16 inches
- ENC16/18 - Weather-Resistant Enclosure, 16 x 18 inches
- ENC12/14 - Weather-Resistant Enclosure, 12 x 14 inches
- 18997 - 14/18 Aluminum Enclosure with Blank Panel
Privacy Policy Update
We've updated our privacy policy. Learn More