06206 RM Young Wind Marine Wind Tracker - Wind Speed/Direction Display
Compact adjustable display
For marine applications
weather applications water applications energy applications gas flux and turbulence applications infrastructure applications soil applications

Overview

Wind speed is displayed in your choice of units: kph, m/s, mph, knots. Maximum wind speed is saved on the display until reset by the operator. Wind direction information is clearly displayed on a circular pattern of LEDs. Bold front panel graphics give a quick indication of wind angle relative to vessel heading. Brightness control allows adjustment for best viewing in any light. Luminous front panel markings allow viewing even in a darkened pilothouse.


Read More

Images

Detailed Description

The Wind Tracker may be mounted from a bulkhead or installed in a flush panel by removing the mounting bracket. Panel cutout dimensions are given in the specifications.

An optional rack mounting panel (Model R06280) and protective enclosure (Model R06260) are available.

The Wind Tracker will display a software version number for approximately 4 seconds. It then begins to display wind information. The following information is displayed:

  • Wind Speed
  • Wind Speed Units
  • Maximum Wind Speed or Direction degrees
  • Relative Wind Direction (single orange indicator)
  • Direction Variability (green indicators)
  • WS, WD Alarm Status Indicators (if selected)

Specifications

  • Wind Speed Range: 0-200 km/h, 0-100 mph, 0-50 m/s, 0-100 knots
  • Wind Direction Range: 0-180 degrees (port & starboard) 
  • Display Resolution
    • Wind Speed & Maximum: 1 unit (0.1 m/s only)
    • Wind Direction: 10 degrees (36 points circular), 1 degree (digital display mode)
  • Compatible Sensors: 05103 Wind Monitor, 05106 Wind Monitor-MA, 09101 Wind Monitor-SE, 04101 Wind Monitor-JR
  • Other Inputs: RS-485 (NMEA) 4-20 mA
  • Voltage Outputs: 0-5 VDC Full Scale for WS & WD
  • Alarm Relays: Normally Open contacts for WS & WD
  • Contact Rating: 5A resistive, 2A inductive @ 250 VAC, 30 VDC
  • Remote Displays: Up to 16 remote displays can be connected in parallel.
  • Power Requirement: 12-30 VDC, 4.5 W
  • Dimensions: 144 mm (5.65 in) x 144 mm (5.65 in) x 36 mm (1.4in)
  • Panel Cutout: 138 mm (5.43 in) x 138 mm (5.43 In)
  • Weight: 0.45 kg (1 lb)
  • Shipping Weight: 1.4 kg (3 lb)

Privacy Policy Update

We've updated our privacy policy.  Learn More