This product is no longer available. Some accessories, replacement parts, or services may still be available.
| Services Available |
|---|
Overview
This version of the 034B Wind Set has a connector rather than the standard pigtails. The connector attaches to the CS110 Electric Field Meter or MetData1 Weather Station. The 034B-LC combines a 3-cup anemometer and vane into a single integrated package. It is constructed out of lightweight aluminum and designed for continuous long-term operation.
Read More
The "-LC" version of this product terminates in a connector (instead of pigtails) for use with a CS110 Electric Field Meter or MetData1 Weather Station. The length of the cable is specified at the time of order.
Images
Detailed Description
This version of the 034B Wind Set has a connector rather than the standard pigtails. The connector attaches to the CS110 Electric Field Meter or MetData1 Weather Station.
Met One’s 034B Windset combines an anemometer and vane into a single integrated package. It is constructed of lightweight aluminum and is designed for continuous long-term operation.
The 034B measures wind speed using a three-cup anemometer that contains a sealed magnetic reed switch. Rotation of the cupwheel produces a pulse that is directly proportional to wind speed. The frequency of the pulse is measured by the datalogger pulse count channel, then converted to engineering units (mph, m/s, knots).
Wind direction is sensed with a potentiometer. With the precision excitation voltage from the datalogger applied to the potentiometer element, the output signal is an analog voltage that is directly proportional to the azimuth of the wind direction.
Specifications
Wind Speed (Anemometer) |
|
| Range | 0 to 75 m/s (0 to 167 mph) |
| Accuracy < 10.14 m/s (22.7 mph) | 0.1 m/s (0.25 mph) |
| Accuracy > 10.14 m/s (22.7 mph) | ±1.1% of true Wind Direction (Vane) |
| Resolution | < 5° |
| Starting Threshold | 0.4 m/s (0.9 mph) |
| Sensor Output | Pulsed contact closure |
Wind Direction (Vane) |
|
| Mechanical Range | 360° |
| Electrical Range | 356° (4° open) |
| Accuracy | ±4° |
| Damping Ratio | 0.25 |
| Resolution | 0.5° |
| Potentiometer Resistance | 0 to 10 kΩ (open at crossover) |
Compatibility
The connector can be attached to the CS110 Electric Field Meter or MetData1 Weather Station. The CS110 has a CR1000 and the MetData1 has an on-board CR10X.
The anemometer is measured by the PulseCount Instruction when used with the CS110, and by Instruction 3 (Pulse Count) when used with the MetData1. The wind vane is measured by the BrHalf Instruction when used with the CS110 and by Instruction 4 (Excite-Delay-SE) when used with the MetData1.
Documents
Brochures
Manuals
Frequently Asked Questions
Number of FAQs related to 034B-LC: 2
-
This depends on the information contained in the calibration sheet:
- If the calibration sheet contains coefficient information, Campbell Scientific keeps a copy, and a replacement copy can be requested.
- If the calibration sheet does not contain coefficients, Campbell Scientific does not keep a copy. It may be possible to contact the original manufacturer for a replacement copy.
-
The information included on a calibration sheet differs with each sensor. For some sensors, the sheet contains coefficients necessary to program a data logger. For other sensors, the calibration sheet is a pass/fail report.
Privacy Policy Update
We've updated our privacy policy. Learn More