TempVue20
TempVue20
TempVue20 Pt100 Digital Air Temperature Sensor
Cable Termination Options
-PF -PF w/Ferrules on Wires
-PF Cable Length Options
-10 -10 w/3m per sensor
-17 -17 w/5m per sensor
-33 -33 w/10m per sensor
-50 -50 w/15m per sensor
-100 -100 w/30m per sensor
-AQ -AQ AQWire Connector
-NC -NC w/No Additional Cable
Output Option
-S -S SDI-12 Comms Output
-M -M Modbus Comms Output
Temperature Range
-ST -ST -40 to +60C (1 Point)

Add to your Quote List


Product Details
Restockable Yes
Warranty Two years
Compliance –

Common Accessories

TS100SS
TS100SS
TS100SS Apogee Aspirated Radiation Shield
show details
The TS100SS is a fan-aspirated radiation shield that minimizes temperature-measurement errors caused by incident solar radiation. The unique aerodynamic shape and rugged, low-power fan make it the first research-grade fan-aspirated shield that is practical for use on battery- or solar-powered stations. The shield provides excellent sensor protection and accommodates various combinations of thermistors, PRTs, and humidity sensors using one of the sensor port adapter plugs.


RAD06
RAD06 6-Plate Solar Radiation Shield
show details
The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.


RAD10E
RAD10E 10-Plate Solar Radiation Shield for Larger Sensors
show details
The RAD10E, manufactured by MetSpec, is attached to a Campbell Scientific crossarm or mast. The RAD10E uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. This shield also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2 m s-1 (~4.5 mph)), giving a better measurement.


41003-5
41003-5 10-Plate Solar Radiation Shield
show details
The 41003-5 is a naturally aspirated 10-plate radiation shield. Its louvered construction allows air to pass freely through the shield, keeping the probe at or near ambient temperature. The shield's white color reflects solar radiation.


CABLE8PIN-LITE
CABLE8PIN-LITE
CABLE8PIN-LITE 22 AWG Three-Conductor Cable with One Eight-Pin Connector
show details
This replacement cable is typically used with an SDI-12 sensor that has an M12 socket (female) connector, such as the Wintersense SDI-12, to connect it to a data logger with wiring terminals. The CABLE8PIN-LITE has an M12, eight-pin pin (male) connector on one end and terminates with ferruled wires.


Other Accessories

35867
35867 TS100SS Port Adapter for the HygroVUE5
show details
The 35867 is an adapter plug that allows a TempVue™ sensor to fit inside the TS100SS Aspirated Radiation Shield.


Services

 
×