Hi everyone.
I have a CR310-Cell with a 4G connexion.
I would likke to share this connection over the ethernet for an instrument that is independent of the CR but requires an internet connection.
I have already set the ethernet port to "Always ON" and the router option to "True" in advanced tab settings.
Now, I need to add the line configuration to my program to forward the connection.
Does ModbusClient() command allow to configuring thos connection sharing ?
Thank's for you help.
The data logger does not have IP routing capability.
Recommendation is to program the CR310 to read the desired values from the other device. Then store the values in the CR310 in a way that can be collected.
This post is under review.