The Campbell Scientific Blog: Your source for useful how-to...

How to Create Custom Sensors in Short Cut

Author: Jason Ritter | Last Updated: 02/27/2019 | Comments: 4

Have you ever wanted Short Cut to support more sensors? Although Short Cut supports many sensors, you may have found that the sensor you want to measure is not on the list. What do you do then? How do you add that sensor to your... read more

How to Select the Correct Pulse Type for Your Measurements

Author: Jacob Davis | Last Updated: 04/21/2016 | Comments: 0

Have you ever had a sensor work on a P (pulse) data logger terminal, but not on a C (control) terminal? Is the list of choices for the PConfig parameter in the PulseCount() instruction daunting? Campbell Scientific data loggers offer several options for measuring pulse... read more

How to Access Live Measurement Data Using Modbus

Author: Paul Smart | Last Updated: 04/07/2016 | Comments: 24

Did you know that you can turn your Campbell Scientific data logger into a Modbus TCP/IP server? Do you know why that’s a good idea? Campbell Scientific data loggers are commonly used as Modbus server devices. This means that the data logger is configured to... read more

5 Steps to Post Your CR6 Data to Weather Underground

Author: Sam Utley | Last Updated: 03/23/2016 | Comments: 10

Note: It appears that after this blog article was written, Weather Underground has been phasing out the “PWS – Upload Protocol.” The following tutorial may or may not work currently or in the future. However, it continues to offer some insight into structuring a CRBasic... read more

The Campbell Scientific Blog Your source for useful how-to information and helpful expert advice

Blog Topics

Area / Application

Product Category

Activity

Corporate / News

Search the Blog

Subscribe to the Blog