This product is no longer available and has been replaced by: SVP100. Some accessories, replacement parts, or services may still be available.
| Services Available |
|---|
Overview
The SVP48 is a DIN rail bracket that holds up to 22 of the 8206 surge protectors. This bracket mounts to the backplate of our standard enclosures. The 8206 protects a data logger against electrical transients conducted along the sensor cables.
Read More
Images
Detailed Description
The SVP48 DIN rail bracket holds up to 22 of the 8206 surge protectors. Each 8206 is ordered as a separate line item. The DIN rail attaches to an enclosure backplate via two mounting holes that are spaced 6 in. (15.2 cm) apart, center-to-center.
The 8206 protects a data logger against electrical transients conducted along the sensor cables. The surge protectors trigger at 110 Vac or 156 Vdc; voltages exceeding those levels are shunted to ground. The surge protectors are rated for 125 Vac or 177 Vdc. The voltage limitation is 650 V at 1 kV/microsecond. Each surge protector protects one signal conductor and provides a termination for one shield wire.
Compatibility
Please note: The following shows notable compatibility information. It is not a comprehensive list of all compatible products.
Documents
Manuals
Frequently Asked Questions
Number of FAQs related to SVP48: 1
-
Yes. There is surge protection built into the sensor electronics. The sensor survives a surge of 2 kV at 42 ohm line-to-ground on digital I/O and 2 kV at 12 ohm line-to-ground on power. It also survives a surge of 2 kV at 2 ohm line-to-ground on the rods.
If additional surge protection is required, consider using the SVP100 Surge Voltage Protector DIN Rail with Mounting Hardware.
Privacy Policy Update
We've updated our privacy policy. Learn More